The pairing process begins the first time a user powers the headset on. Below is the procedure to pair a subsequent phone or device with the ML2 headset:
Procedure
1. Start with the headset powered off. Press and hold the call control button until the indicator light flashes an alternating red-blue. The headset is now in pairing mode.
2. As the indicator light flashes blue and red, activate Bluetooth on the phone and set it to search for new devices:
2. As the indicator light flashes blue and red, activate Bluetooth on the phone and set it to search for new devices:
- iPhone*: Settings > General > Bluetooth > On
- Android: Settings > Wireless & Networks > Bluetooth On > Scan for devices.
*iPhone menus may vary.
3. Select "PLT_ML2".
4. If necessary, enter four zeroes (0000) for the passcode or accept the connection.
Once successfully paired, the indicator light stops flashing blue and red and you should hear "Phone 1 [or 2] connected".
3. Select "PLT_ML2".
4. If necessary, enter four zeroes (0000) for the passcode or accept the connection.
Once successfully paired, the indicator light stops flashing blue and red and you should hear "Phone 1 [or 2] connected".
No comments:
Post a Comment